Spacer
  HOME / ABOUT US / CASE STUDIES / TECH LIBRARY / WHAT'S NEW / TOOLS / SHOP / CONTACT US
SITE SEARCH
STOCK CHECK
Home > Incandescent > Welded Wire Terminal lamps (WWT)
Incandescent  |  Welded Wire Terminal lamps (WWT)

Click on column headers below to sort the table. All headers to the left of comments are sortable.
Part Nbr Size Volts Amps MSCP Life Comments Specs
(pdf)		 RFQ Rerate
WWT1-EW10/GRN T-1 14 0.1 0.5 5000 n/a link request rerate
WWT1-EW10/WHI T-1 14 0.1 0.5 5000 n/a link request rerate
WWT1-EW35/WHI T-1 14 0.14 0.64 5000 n/a n/a request rerate
WWT2-EW34/BLA T-2 14 0.127 0.7 7000 n/a link request rerate
WWT2-EW87/BLA T-2 14 0.14 0.95 7000 n/a link request rerate

If you cannot find what you are looking for, contact us.

Product Information



One-piece, Long Life, PCB Design,: Excellent Performance, Low Cost, Reduced Labor The welded wire terminals are ideal for a variety of applications to include automotive cluster lighting. This design provides for the perfect high reliability alternative to wedge based lamps, offering up to 300% greater lamp life. The welded contact is ideal for high vibration applications and the hole pattern often allow for drop in replacement of wedge lamp/socket designs. Paddle base styles available for easy hand placement. Low profile base option is offered to accommodate applications when limited space is available on the back side of the board.
Colored Filters available.

Case Study:
Soldering Problem
An important automotive manufacturer had a soldering problem which caused a small percentage of lamps to tilt.
Read More...

Incandescent | CCFL | LED | Inverter | About Us | Case Studies | Tech Library | What's New | Shop | Contact Us

© 2010 JKL Components Corporation - Legal Information