PACOIMA, CA (March 5 2007) -- JKL Components Corporation, a leading lighting technology provider, is providing new seven output inverters for industrial use. The P-0701-02 inverter is a general purpose inverter used to power 7 individual CCFL?s requiring a start voltage of 2200 Volts AC RMS each. The inverter requires 24 Volts DC at 2.0 Amps maximum and supplies controls for lamp on/off function, dimming, and fault indications for lamp open conditions. The compact, low-profile size of the P-0701-02 inverter is 81mm wide X 285mm long X 10mm thick. The PCB is 1.6mm thick and its thickness is included in the overall thickness of the assembly. All components use surface mount technology so that there are no protrusions through the bottom side of the board There are nine mounting holes located around the periphery of the board, seven of which are isolated and two are connected to the ground plane. It has a socket for a 13 pin Molex 53261-1371 input connector, and sockets for seven 2 pin JST SM02B-BHSS-1-TB input connectors. Call for availability. JKL Components Corporation offers solutions that encompass a wide variety of lighting technologies, including incandescent, fluorescent, ultraviolet, LED and gas-filled lighting. JKL is registered ISO 9001-2001. For additional information, please contact Sherry Carpenter, Sales Manager of JKL Components Corporation, 13343 Paxton Street, Pacoima, CA 91331 * Tel. 818 896-0019 * Fax 818 897-3056 * Email *